Maintenance Instructions - T3 76851 Guide De L'utilisateur

IMPORTANT SAFETY INSTRUCTIONS
6
Be sure the dual-voltage selector is in the correct voltage
position before operating. Before plugging in, read the
information about dual voltage contained in the instruction
section of this manual. This appliance has been set to initially
operate at 240 volts (220 volts). Refer to the Operating
Instructions section of this manual for conversion to 120 volt
(110 volt) operation or the equivalent.
Do not use the appliance near a bath tub, washbasin
or other vessel filled with water. Never place the
appliance in water or any other liquid.
SAVE THESE INSTRUCTIONS
WARNING

MAINTENANCE INSTRUCTIONS

FEATHERWEIGHT COMPACT
1. Make sure that the inlet and outlet grills are clear of dust and
lint for proper operating performance.
2. Your hair dryer is virtually maintenance free. It contains no
user serviceable parts, and no lubrication is needed.
3. Always remove the plug from the wall outlet and allow the
dryer to cool before cleaning.
4. Use a small brush or brush attachment of a vacuum cleaner
to remove dust and lint that may have accumulated on the
metal mesh at the back of the dryer.
5. The hair dryer exterior may be wiped clean with a damp cloth.
6. CAUTION: Never allow the power supply cord to be pulled,
twisted or severely bent. Never wrap the cord tightly around
the dryer. Damage will occur at the high flex point of entry
into the hair dryer, causing it to rupture and short. Inspect the
cord frequently for damage. Stop use immediately if damage
is visible, if the unit stops or if it operates intermittently.
7. If the cord or hair dryer is damaged or does not operate
properly, return it to a service center for repair.
8. When not in use, your hair dryer should be disconnected and
stored in a safe, dry location and out of reach of children. Do
not wrap the cord around the dryer. Allow the cord to hang or
lie loose and straight at the point of entry into the hair dryer.
9. Do not attempt to repair the appliance yourself.
7