General Information; For Your Safety; Proper Use - Nedo X-Liner 2 Mode D'emploi

1 General Information

1.1 For your safety

Documentation
Please familiarise yourself with these operating instructions and the safety information provided
before you start to work with the X-Liner 2.
The safety information is based on the current standards EN 60825-1:2007 and IEC/TR 60825-
14:2004. Observing these instructions and information ensures safe working.
Laser radiation
The X-Liner 2 conforms to EN 60825-1:2007 (VDE 087 Part 1).
2M
Warning signs
Never remove the warning signs on the unit.

1.2 Proper use

Use
The X-Liner 2 is suitable for marking heights, for aligning, plumbing, levelling and for carrying
out similar work. The unit is designed for indoor use.
Repair
Repairs may only be carried out by NEDO or an authorised customer service agent. Never open
the unit, doing so cancels the warranty.
Careful handling
The X-Liner 2 is a sensitive, high-precision instrument and should therefore be handled with
appropriate care.
1.3 Environment
Disposal
Dispose of the unit in accordance with the applicable materials recycling regulations.
Batteries/rechargeable batteries
Batteries/rechargeable batteries are hazardous waste and may not be put into domestic waste.
They must be properly disposed of according to the respective national guidelines.
Operating Instructions X-Liner 2
LASER RADIATION
NEVER LOOK INTO THE BEAM
OR VIEW IT DIRECTLY WITH
OPTICAL EQUIPMENT
LASER CLASS 2M
EN 60825-1:2007
P  1mW
: 630-680 nm
Laser exit openings
www.rusgeocom.ru
EN
8