General Notes - Nedo ECO 600 HV Mode D'emploi

General Notes

For your safety
Documentation
Please familiarise yourself with these operating instructions and the safety information
it contains before you start to work with the ECO 600 HV. These are based on the
current EN 60825-1:2007 and IEC/TR 60825-14:2004 standards. Observing these
instructions and this information ensures safe working. The laser may only be used by
trained personnel!
Laser radiation
Laser radiation ECO 600 HV laser class 3R according to
(VDE 087 part 1).
General safety instructions for handling laser radiation:
•
Prevent direct eye exposure to the beam!
•
Do not direct the beam at other people or into public areas!
•
To prevent reflections, do not point the laser at reflective surfaces.
•
If possible, do not operate the laser at eye level!
•
The housing of the laser may be opened by trained service technicians only!
•
The emitted laser radiation has the following properties:
-
-
-
-
-
Warning signs
Never remove the warning signs on the unit.
For users in Germany:
Please note and following the guidelines of the professional/trade association with liability for
industrial safety and insurance (Berufsgenossenschaftliche Richtlinie) BGI832 on the operation
of laser equipment: It is recommended that operation of a class 3R laser be registered with the
responsible professional/trade association (Berufsgenossenschaft) (BGI 832, Section 2.5).
Operating Instructions ECO 600 HV Rotating Laser
LASER RADIATION
AVOID DIRECT EYE EXPOSURE!
CLASS 3R LASER PRODUCT
Power P 5mW
≤
Wavelength : 630-680 nm
λ
ϕ
Beam divergence
≤
Stationary laser dot: CW laser
Rotating laser dot: Laser pulse with f: 1Hz ... 10Hz
1.5 mrad
DIN EN 60825-1:2007
DIN EN 60825-1:2007
P ≤ 5mW
λ: 630-680 nm
ϕ
≤ 1,5 mrad
EN
9