Product Diagram - Wagan Tech TravelCharge Companion GO Guide D'utilisation

PRODUCT DIAGRAM

OPERATION
1. Insert the DC plug into vehicle's 12 V or 24 V car cigarette lighter socket.
2. Connect the device you wish to power into one of the USB ports. Power
supplied depends on the device's needs, but is limited to each port's
maximum output power (indicated in the diagram above).
TROUBLESHOOTING
Tablet/e-reader or smartphone does not charge.
Disconnect electronic from the USB port(s) and check the LED indicator and fuse.
My Samsung tablet will not charge.
Samsung tablets require a different charging configuration. This unit is not
compatible with Samsung tablets.
My USB device keeps dropping in and out of charge mode.
If you have two iPads or other similar high-current draw devices plugged into
both ports, the circuit may be overloading. Total current cannot be over 3.1 Amps
from all devices.
No lights are on and there is no output power.
Check the fuse in the cigarette lighter plug by removing the cap on the DC plug.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2015 Wagan Corporation. All Rights Reserved.
USB Power Port: 1.0 A max
USB Power Port: 2.1 A max
LED Power Indicator
2