Inserting/Exchanging Gobos; Overhead Rigging - EuroLite TS-155 Mode D'emploi

Inserting/Exchanging gobos

DANGER!
Install the gobos with the device switched off only.
Unplug from mains before!
If gobos are to be exchanged, please follow the instructions below:
CAUTION!
Never unscrew the screws of the rotating gobo
as the ball bearing will otherwise be opened!
Remove the fixation-ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the
fixation-ring together and insert it in front of the gobo.

Overhead rigging