CONTINENTAL EDISON CEVCWBA Guide D'utilisation page 19

ASSEMBLY
Always disconnect the appliance from the mains socket before
assembling or disassembling accessories.
Connecting the hose
• To fit the hose, push the hose end into
the hose socket and turn it clockwise
until it locks into place.
• To remove the hose, hold the hose end
and turn it anticlockwise.
Connecting tubes and accessories
1. Insert the hose handle into one end of tubes.
2. Adjust the tubes to your desired length.
• Push forward the switch on the tube then adjust. Release the
switch until the desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessories, hold each piece tightly and pull
firmly apart.
18
EN