dji N3 Guide De Démarrage Rapide page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
N3 Quick Start Guide
3. Installation
System Setup
Watch the video tutorial for an overview
of the installation process.
Refer to the Installation section of the
user manual for detailed procedures.
LED Blinking Patterns
Refer to the LED Indicator section of the
user manual for a detailed description of
blinking patterns.
4. Specifications
Built-in Functions
Basic Flight Modes
Return-to-Home Modes
Safety Features
DJI GO App
(DJI Lightbridge 2 required)
Supported DJI Equipment
Optimized Flight Performance (Subject to airframe type and payload, most parameters can be configured in
Assistant 2.)
Hovering Accuracy
(In P-Mode)
Max Wind Resistance
Max Yaw Angular Velocity
Max Pitch Angle
Max Ascent Velocity
Max Descent Velocity
Electrical & Mechanical
Rated Power
Rated Peak Power
Operating Temperature
Refer to the Appendix section of the user manual for full specifications.
Safety Guidelines
It is important to understand basic flight
guidelines for the safety of both you and those
around you. Refer to the Disclaimer and Safety
Guidelines for more information.
©
2017 DJI All Rights Reserved.
6
P-mode (Positioning); Atti mode / A-mode (Attitude); S-mode (Sport); Manual mode
Smart RTH; Low voltage RTH; Failsafe RTH
Failsafe mode; Low battery voltage warning; Custom flight altitude and radius
limits; No Fly Zones; Motor Redundancy (for 6 and 8 rotor platforms); Motor
overload detection; Built-in double IMUs; Built-in data recorder; Course Lock;
Home Lock
Beginner mode; Auto takeoff and landing; Wireless flight controller configuration;
Flight data OSD; Intelligent Flight Modes: Course Lock, Home Lock, Point of
Interest (POI), Waypoints
DJI aerial platforms (e.g. F550, S900, S1000, S1000+); DJI gimbal systems (e.g.
Zenmuse X3 / X5 / X5R / XT, Z15 A7 / GH4 / 5D Ⅲ / BMPCC); DJI Intelligent
Landing Gear; iOSD mini, iOSD MARK II; Smart ESC
Vertical: ±0.5 m; Horizontal: ±1.5 m
10 m/s
150°/s
45° (Default 35°)
5 m/s
4 m/s
3.3 W
5 W
14° to 131° F (-10° to 55° C)
Configure the Parameters
Watch the video tutorial for a brief walk
through.
Then launch DJI Assistant 2 and follow
the instructions.
Strictly follow the provided guidelines.
Failure to do so may lead to unexpected
flight behavior or serious accidents.
No Fly Zones
Learn more at:
http://www.dji.com/flysafe/no-fly
※ This Quick Start Guide is subject to change without prior notice.

Publicité

Table des Matières
loading

Table des Matières