How To Use Advanced Functions; Sleep Function - HTW RG51 Manuel De L'utilisateur

How to Use Advanced Functions

Swing function(some units)
Press Swing button
SWING
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.

SLEEP function

SLEEP
The SLEEP function is used to decrease energy use while you sleep (and don t need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
The sleep function is not available in Fan or Dry mode.Please refer to the OWNER'S MANUAL for
more details.
I SENSE function(some units)
When the I SENSE function is activated, the remote display is actual temperature at its location.
The remote control will send this signal to the air conditioner every 3 minutes interval until press
the I SENSE button again.
NOTE: Press this button for seven seconds to start/stop memory feature of I SENSE function.
If the memory feature is activated, "
If the memory feature is stopped, "
While the memory feature is activated, press the ON/OFF button, shift the mode or power failure
will not cancel the I SENSE function.
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
" displays for 3 seconds on the screen.
On
OF
" displays for 3 seconds on the screen.
26
2s
SWING