Publicité
CALYPSO Series
Height Adjustable Keypad Quick Guide
UP & DOWN
Basic Touchscreen Keypad Operation
•
The touchscreen keypad buttons lockout after inactivity. If the buttons are not touched for 30 seconds, the M1, M2 and
Home buttons will lock. To unlock, touch either the up or down button once and all buttons will re-activate.
•
Two preferred heights can be set using the two Memory buttons M1 and M2.
•
The Home button has been pre-programmed for the optimal height location of 28.3" (72cm) and is non-adjustable.
This height adjustable base is equipped with an anti-collision feature. If the desk encounters an object while going up or
•
down, the desk will automatically reverse.
28.3
M1
M2
Note/Caution:
Saved height presets will not be lost in the event of a power outage.
•
•
Do not exceed recommended weight limit of:
•
Recommended weight limit must also include the weight of the desktop/worksurface.
•
Install with 2.5cm (1") clearance around work surface to prevent finger pinch.
•
Ensure vertical motion is clear of obstruction
•
Duty cycle: 10% of the industry standard run cycle. For example, two minutes of constant operation should be
followed by 18 minutes of inactivity.
•
The design of Calypso does not support the lifting of extreme weight loads, for example, a person.
•
Do not open electrical components (controller, motor housing or keypad).
•
Calypso is designed for indoor use only.
•
In the unlikely event that the desk becomes loose/shaky, check that all screws and bolts are securely installed
and tight.
QUESTIONS OR CONCERNS?
Please contact Customer Service
T 1-800-567-3060
M-F 6am - 4:30 pm PST
cs@heartwood.ca
June 25, 2018 REV A
DISPLAY
Up & Down Buttons
When the Up or Down buttons
are touched, the desk will move
until pressure is removed from
28.3
M1
M2
the button.
Memory Buttons (M1 & M2)
Using the Up & Down buttons,
position the desk at a desired
height. Press and hold either
HOME
M1 or M2 for 5 seconds. Once
a "beep" is heard, the height is
saved.
Quick guide should remain with the product after
28.3
M1
28.3
HOME
28.3
M1
M2
2 LEG MODEL (CAL-E1-2LEG) - 120kg (265lbs)
3 LEG MODEL (CAL-E1-3LEG) - 145kg (320lbs)
assembly for user reference.
MEMORY
M2
HOME
Display Screen
Displays the current height of
the desk.
M1
M2
Home Button
Press the Home button to move
to the optimal height of 28.3" .
HOME
HOME
HOME
Page 10 of 10
Publicité
