Control Panel - Velleman ARCHITECTURAL CITY COLOR 1200 Mode D'emploi

Mounting the Device
This device is intended for floor mounting only. Please make sure to use the appropriate tools to install the
device. Tools, mounting bolts and nuts are not included.
DMX-512 Connection
 When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the other
side to the male XLR input of the device. Multiple devices can be linked through serial linking. The linking
cable shall be a dual core, screened cable with XLR input and output connectors.
 A DMX terminator is recommended for installations where the DMX cable has to run a long distance or is in
an electrically noisy environment (e.g. discos). The terminator prevents corruption of the digital control
signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor between pins
2 and 3, which is then plugged into the XLR output socket of the last device in the chain.
6. Operation
The device can be used in the following modes:
 stand-alone mode with automatic programme
 master/slave
 with a DMX-512 controller.
6.1

Control Panel

Access the control panel functions using the four panel buttons located below the display.
Button Function
MENU to access the menu, quit the current function without saving the setting, or quit the menu
UP to scroll upward in a list of functions or options, or increase a value
DOWN to scroll downward in a list of functions or options, or decrease a value
ENTER to confirm and save a selected option or value
6.2 Menu
main menu sub-menu
A.001 A.***
4cH / 7cH
AUTO AT.*F / AT.*O
EDIT Pr.*F / Pr.*O
SLAV / HOST
(1) strobe effect 1 = fast on, fast off; strobe effect 2 = slow on, fast off; strobe effect 3 = fast on, slow off
V. 01 – 24/03/2015
VDPLOW1208
option value
001-511
4 or 7
1-8
000
r.***
001-255
000
g.***
001-255
000
b.***
001-255
000
E.***
001-255
000
S.***
001-255
000
T.***
001-255
000
001-079
F.*** 080-159
160-239
240-255
F1.**
F2.**
00-99
F3.**
F4.**
5
function
DMX address
4- or 7-channel mode
8 auto programmes (O = on, F = off)
red off
red brightness, dark to bright
green off
green brightness, dark to bright
blue off
blue brightness, dark to bright
white off
white brightness, dark to bright
no colour mixing
soft colour mixing, fast to slow
run current programme
set running time for each programme
no strobe effect
strobe effect 1 (1) , fast to slow
strobe effect 2 (1) , fast to slow
strobe effect 3 (1) , fast to slow
custom strobe effect, slow to fast
light-up time
max. brightness
light-down time
light off time
master (HOST) or slave (SLAV) setting
only for custom strobe
effect F.***, 240-255
©Velleman nv