Cleaning And Care - OK. OSB 102 Mode D'emploi

Size - A5

CLEANING AND CARE

• Warning! Unplug the product and let it cool down completely before cleaning.
Never immerse electrical parts of the product in water during cleaning or operation.
Never hold the product under running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes,
metallic or sharp objects. Solvents are harmful to human health and can attack
plastic parts, while abrasive cleaning mechanisms and tools may scratch the
surface(s).
• Clean the product's exterior surfaces with a slightly damp cloth and then dry them
thoroughly.
• Make sure that no water enters the product interior (for example, through the
switch).
• Fill some warm water into a bowl and put the blender bar into the water. Plug in the
product and switch it on. Let the Blender bar operate for some seconds. Unplug the
product.
• Keep the product in a dry, cool location which is protected against moisture and
direct sunlight. Keep this product out of the reach of children.
SPECIFICATION
Rated voltage: 220-240 V~, 50 Hz / Rated power input: 170 W /
Continuous operation time: 1 Min / Protection class II
DISPOSAL
Do not dispose of this appliance as unsorted municipal waste. Return it to a
designated collection point for the recycling of WEEE. By doing so, you will help
to conserve resources and protect the environment. Contact your retailer or local
authorities for more information.
OSB102_A5_130717.indb 18
18
23/10/13 10:18 AM