Bosch GAS 50 Instructions D'emploi page 13

Malfunctions
In the case of inadequate vacuuming perform-
ance, check the following:
– Is the vacuum top 3 attached properly?
– Is the vacuum hose system clogged?
– Are the extension wands connected firmly?
– Is the container full?
– Is the dust bag 16 full?
– Is the folded filter 17 clogged with dust?
Emptying at regular intervals ensures optimum
vacuuming performance.
If the vacuuming performance is not achieved
thereafter, take the machine to customer service.
Environmental Protection
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Noise Information
Measured values determined according to
EN 23 744 (1.60 m height, 1 m distance).
Typically the A-weighted sound pressure level of
the product is 69 dB (A).
Service and Customer Assistance
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
............................
Advice line
....................
Fax
.............................................
13 • 1 609 929 C44 • TMS • 23.05.02
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89
English - 4
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
...................................
Fax
....................................................
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
...............................................
Fax
...............................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
.....................................................
Fax
.....................................................
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 60 335
according to the provisions of the directives
73/23/EEC, 89/336/EEC.
02
Dr. Gerhard Felten
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
Dr. Eckerhard Strötgen