LawnMaster BV1211 Manuel D'utilisation page 11

ASSEMBLY
ASSEMBLING THE BLOWER TUBE
See Figure 2.
Slide blower tube forward until the lock button clicks into the top of the tube.
A - Air Inlet
B - Blower Tube Release Button
C - Concentrator Nozzle
D - Blower Tube
Fig. 2
ASSEMBLY FOR USE AS A BLOWER (See Fig. 3) .
1. Slide blower tube forward until the notched areas on the blower housing click into the slots on
the tube.
2. Attach the concentrator nozzle onto the end of the blower tube until locked into position.
(Concentrator nozzle is used to increase air flow in tight areas: flower beds, under decks, etc.).
Fig.3
INSTALLING VACUUM TUBES AND COLLECTION BAG
1. Open vacuum gate. (See Figure. 4)
2. With gate open, align the two different sized plastic tabs (one large / one small) on the end of the
vacuum tube with the like shaped openings found on the vacuum access gate opening. (See Figure. 5)
3. Insert the tab on the vacuum tube labeled A into the vacuum gate opening labeled A. (See Figure. 6)
4. With Vacuum tube tabs properly aligned, twist vacuum tube. (See Figure. 7)
D
C
B
11
A