Kenmore 665.1472 Série Guide D'utilisation Et D'entretien page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove foot pedal.
A
A. Mounting screws
B. Foot pedal
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove decorative panel and discard
mounting screws.
4. Align the bottom of the custom panel with the bottom of the
drawer front.
5. Secure the custom panel from the back using 4 - #8 x 1"
wood screws as shown.
10
6. Attach a 15" (38.1 cm) x ¹⁄₂" (1.3 cm) quarter-round filler
along the top of the drawer front using glue or screws.
7. Reinstall the toe guard using the existing mounting screws
and ¹⁄₂" washer. Then, reinstall the foot pedal.
A
B
A
C
D
E
F
A. Custom panel
B. 15" (38.1 cm) x ¹⁄₂" (1.3 cm) quarter-round
C. Panel screw locations
D. Toe guard
E. Washer
F. Toe guard mounting screw
B
C

Publicité

Table des Matières
loading

Table des Matières