Setting The Time; Setting The Date - Lotus ILMJR00 Manuel D'instruction

SETTING THE TIME

1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands

SETTING THE DATE

* Please do not set the date between 9:00PM and 1:00AM
1. Pull the crown out to the 1st Click Position.
2. Turn the crown counter-clockwise to set the date.
3. After the date has been set, push the crown back to the normal position.
SETTING THE DAY
* Please do not set the day between 11:00PM and 3:00AM
1. Pull the crown out to the 1st Click Position.
2. Turn the crown counter-clockwise to set the date.
*Please do not stop when the hand is between the day like the following picture.
ILMJROO/10/20
14
ILMJROO/10/20
SETTING THE DAY
Please do not stop when
the day hand is in this
position.
Please set the day hand
just positioned on the
day scale.
Figure 1
*If the day hand stops at a position like Figure.1, please turn the crown clockwise very
slowly and stop soon after the day hand positioned like Figure 2.
3. After the day has been set, push the crown back to the normal position.
These specifications might be changed without prior notice.
Figure 2
15