Displays And Buttons; Setting The Time; Setting The Date - Lotus ILMOS49 Mode D'emploi

DISPLAYS AND BUTTONS

Chronograph
second hand
Chronograph
minute hand
Hour hand
24 hour
Second hand of 1/20 sec
Chronograph hand
ILM0S49
Minute hand
Button A
1st Click
Position
2nd Click
Normal
Position
crown
position
Button B
Calendar
14
ILM0S49

SETTING THE TIME

1. Pull the crown out to the 2nd position so that the second hand stops at ZERO
position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position in synchronization with a
time signal, small second hand begins to run.

SETTING THE DATE

1. Pull the crown out to the 1st position.
2. Turn the crown to anticlockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the
date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
15