Using The Marking/Etching Wand (Optional); Marking Kits; Selecting The Proper Wand And Accessory; Selecting The Proper Current Type, Ac Or Dc And Proper Curent Level, Std Or Max - Walter SURFOX 304 Manuel De L'utilisateur

9

Using the marking/etching wand (optional)

Using the marking/etching wand (optional)
A) Marking kits
Standard kit (54-B 080) includes:
• 1 marking/etching wand with
graphite insert
• 35 mm X 10 mm
and connecting cable
• 20 marking pads
• 5 O-Rings
• 1 SURFOX-M, 100 ml
solution
• 1 SURFOX-E, 100 ml
solution
B) Selecting the proper wand and accesssory
Turn the selector knob to the marking/etching wand icon.
Use the marking/etching wand to permanently mark or etch
your company name, logo, part number or other desired
information onto the surface of stainless steel, using perma-
nent or disposable stencils. Plug the marking/etching wand
into the accessory outlet on the front panel.
C) Selecting the proper current type, AC or DC
and proper current level, STD or MAX
AC for marking using Surfox-M.
DC for etching using Surfox-E.
STD current level is recommended for marking or etching.
14
PRO kit (54-B 081) includes:
• 1 marking/etching wand with
graphite insert
• 35 mm X 10 mm
and connecting cable
• 20 marking pads
• 5 O-Rings
• 1 SURFOX-M, 100 ml solution
• 1 SURFOX-E, 100 ml solution
• 1 Stencil printer and software
• 1 Stencil paper roll 100 mm (W) X 20 m (L)
Marking/etching
wand
STD
TECHNICAL BULLETINS AVAILABLE ON OUR WEB SITE.
MAX STD
MAX