Imetec E1202 Instructions D'utilisation page 13

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• If the supply cord is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
• The motor body of this appliance shall not come into contact with
water, other liquids, spray, steam. For any cleaning and maintenance
operation refer to the instructions in the relevant chapter.
DO NOT use this appliance near a washbasin or a sink filled with
water. During use the appliance must be placed in such a way that it
cannot fall in the washbasin or the sink.
• This appliance must be placed on a flat, stable surface.
• See the external packaging for the characteristics of the appliance.
• Use the appliance only with the supplied accessories that are an
essential part of the appliance.
• This appliance is not intended to be operated by means of an external
timer or separate remote-control system or any other similar system.
DO NOT use near a hob. The supply cord shall not come into
contact with hot, incandescent surfaces, open flames, pots and other
utensils.
DO NOT leave food in contact with the appliance for any longer
than is necessary for preparation.
WARNING! Take care when handling the cutting blades,
emptying the jug and during cleaning.
WARNING! This appliance is not intended to be use with
food at temperature over 40 °C.
• Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
EN
11

Publicité

Table des Matières
loading

Table des Matières