Accessories - GE JCB840DKWW Guide De Démarrage Rapide

Accessories

Looking For Something More?
GE offers a variety of accessories to improve your cooking and maintenance experiences!
To place an order visit us online at:
Troubleshooting
For additional troubleshooting tips, see the full owner's manual at www.GEAppliances.ca
Problem
Surface units do not
work properly
My new oven doesn't
cook like my old one. Is
something wrong with the
temperature settings?
Oven temperature too hot
or too cold
Oven light does not work
Oven will not self-clean
Excessive smoking during
clean cycle
Oven door will not open
after a clean cycle
www.GEAppliances.ca (Canada)
or call 1. 800.661.1616 (Canada)
Possible Cause
A fuse in your home may be blown
or the circuit breaker tripped.
Cooktop controls improperly set.
Your new oven has a different
cooking system from your old
oven and therefore may cook
differently than your old oven.
Oven temperature needs
adjustment.
Light bulb is loose or defective.
Pad operating light is broken.
The temperature is too high to set
a self-clean operation.
Oven controls improperly set.
Excessive soil or grease.
Oven too hot.
What To Do
Replace the fuse or reset the circuit breaker.
Check to see the correct control is set for the surface unit you are using.
For the first few uses, follow your recipe times and temperatures carefully.
If you still think your new oven is too hot or too cold, you can adjust the
temperature yourself to meet your specific cooking preference. NOTE: This
See the Special Features section.
Tighten or replace bulb.
Call for service.
See the Cleaning the Oven section.
Press the Cancel/Off pad. Open the windows to rid the room of smoke.
Wait until the LOCKED light goes off. Wipe up the excess soil and reset
the clean cycle.
7