When the ES 3323 amplifier operates in the graduated priority mode (read
how to set the dip-switch 3 of the PRESET group on the respective user
manual), devices having higher priority can interrupt an announcement in
progress (or prevent it) from a BM 3003 paging microphone.
This event is indicated by the LEDs:
1
ON / BUSY LED
= red
- ENGAGED LINE: it is not possible to page, unless the BM 3003 paging
microphone has a higher priority.
n
:
led
ote
If the
was prevIously IndIcatIng green
3003
pagIng mIcrophone
2
Each ZONE LED
selected) or off.
When paging, the TALK LED
priority.
4
t
talK led
he
wIll turn on
3003
pagIng mIcrophone has hIgher prIorIty than another devIce prevIously actIvated
,
later
It may turn off due to another event havIng hIgher
I
t Is advIsable to read the
'o
':
ther devIces
not belongIng to the same lIne of the used
.
mIcrophone
The busy state is signalled by the 'ON / BUSY' LED indicating red.
A BM 3003 paging microphone can be enabled or not (according to the
system state) by the ES 3323 amplifier.
Try anyway to activate the BM 3003 paging microphone: select 1 or more
zones through the ZONE
button and wait for the confirmation.
It is possible to page only if the BM 3003 has a higher priority level then the
other device that is engaging the system.
Therefore, paging can be either:
- immediate * ;
- or delayed by the chime (the TALK LED
- or denied (the TALK LED
cancelled and the TALK LED
10
PAGING INTERRUPTED BY OTHER DEVICES
(IN OTHER LINES) HAVING HIGHER PRIORITY
,
another devIce has muted the
.
stays green (if the respective zone has been previously
4
turns off due to the new event with higher
(
talK
after pressIng the
es 3323
amplIfIer user manual
3
buttons, then press and release the TALK
4
flashes) * ;
4
flashes for 5 seconds then the selection is
4
turns off).
bm
5
)
bm
button
If the
;
.
.
PAGING WHEN THE SYSTEM
IS BUSY DUE TO OTHER DEVICES
bm 3003
pagIng
5
* s
ee the prevIous paragraph
's
'.
electIve pagIng