Replacing Filters - KLOP INNOVATIONS AC-2 Mode D'emploi

10 Replacing filters

Replacement of the filters of the Aircleaner AC-2 should only be carried out by
a competent person. Make sure you always know which filter(s) need to be
replaced by testing the filters (see also 6.1.4 - Testing filters), before you start
changing the filters.
Ù
When changing the filters, always
make sure that the Aircleaner AC-2 is
completely switched off! For complete
disconnection, also remove the power
cord from the socket!
10.1 Removing grille
Remove the grille by snapping the clamps on
both sides of the unit.
10.2 Removing filters
Remove the grille and the inserted filters.
Do this on both sides.
26 26
10.3 Placing filters
Replace the new filters in the correct
order and snap the grille back in place.
Ù
Always position the filters with the
arrows pointing in the direction of
the fan. The filter with the highest
number must always be placed in
the machine first (closest to the fan)!