Scope Of Use; Safety Information; Items Supplied - Einhell Royal DS 5/1 Mode D'emploi

Anleitung DS 5-1 SPK1 09.11.2005

1. Scope of use

The pressure sprayer is designed for spraying
common home and garden products. This pri-
marily includes pesticides, weed killers and liq-
uid fertilizers.

2. Safety information

Suitable measures must be taken to keep
the unit out of the reach of children.
The pressure sprayer is not designed to
spray acidic and caustic liquids. Nor should
it be used to spray impregnating agents.
Only use a suitable nozzle wire or cleaning
agent to clean clogged nozzles.
Do not spray contents of sprayer on per-
sons or animals.
Always wear protective clothing when
spraying pesticides and insecticides.
Ensure that liquid sprays are not heated
beyond the permitted operating temperatu-
re of 40 °C.
When mixing and working with spray soluti-
ons, always follow the manufacturer's
instructions.
Each time the spraying unit has not been
used for an extended period of time it
should be checked for possible damage
prior to reusing it.
Immediately replace defective parts.
Use only original replacement parts.
Do not leave the unit (filled or empty) in
direct sunlight.
Before placing the unit in winter storage,
thoroughly clean and dry it out so that it is
not damaged by freezing temperatures.
We will not be liable for any damage that
results from improper repairs and/or impro-
per handling of the unit (e.g. using the unit
in ways for which it was not intended).
Opening the unit or performing maintenan-
ce work on it is only permitted when the
tank is depressurized.
To relieve the pressure, pull up the funnel-
shaped knob connected to the safety valve.
Only spray pesticides that have been
approved by the German Biological
16:51 Uhr Seite 9
Research Center for Agriculture and
Forestry (BBA) or equivalent.
Please observe the safety data sheets for
chemical materials and preparations com-
pliant with DIN 52 900, „DIN Safety Data
Sheet for Chemical Materials and
Preparations".
Pesticides include - but are not limited to -
herbicides, insecticides, fungicides and gro-
wth regulators as well as materials that are
intended to be used in conjunction with
these agents in order to modify their pro-
perties or effects.
Each time after using the unit and prior to
performing any maintenance work on it,
release the pressure by raising the pressu-
re valve.
3. Unit description and items
supplied (Fig. 1)
1. Pump / carry handle
2. Spray lance
3. Release lever
4. Tank
5. Strap
6. Safety pressure valve
7. Integral filler neck
8. Adjustable spray head

4. Items supplied

Pressure sprayer
Spray lance
Strap
5. Assembly
Screw the spray tube to the pistol grip
(Figure 1).
Do not unscrew the overpressure valve
(Figure 1/6)
Check to ensure that the screw connec-
tions for the hose at the spray gun handle
and on the tank are tight!
GB
9