Safety Precautions - Reya DOLPHIN PRO 24V40A Notice Technique

SAFETY PRECAUTIONS

NOT-DOLPROREYA-03
TO PREVENT ANY RISK
OF ELECTRIC SHOCK OR FIRE,
READ THIS MANUAL CAREFULLY
BEFORE INSTALLING THE EQUIPMENT.
In the event of any problems or misunderstan-
dings, please contact REYA.
This equipment is not designed for use by people
(including children) with diminished physical, sen-
sorial or mental capacities, or people without ex-
perience or knowledge of such equipment, unless
they have received prior instruction in the use of
the equipment from a person responsible for their
safety or are under the supervision of such a per-
son. Ensure that children are supervised in order to
prevent them playing with the device.
This equipment contains components that may
cause electric arcs or sparks, when connecting
cables, for example.
To prevent any risk of fire or
explosion, do not install this equipment close to
flammable materials, liquids or gases.
Installation precautions.
To prevent any risk of irreversible damage
to the equipment, ensure that you
comply scrupulously with the following
recommendations.
4This device must not be installed close to
a heat source.
4It must not be installed in an airtight or
badly-ventilated compartment.
4The ventilation inlets must not be obstructed.
4Clearance of at least 10 cm must be allowed
around the housing to guarantee adequate
convection.
SAFETY PRECAUTIONS
NOT-DOLPROREYA-03
4This device must not be exposed to running wa-
ter, water spray and dust of any kind.
4We recommend securing the device in a ver-
tical position, with the cable outlet pointing
downwards.
4You are formally prohibited from making
mechanical alterations to the housing, including
making additional holes, for example.
4Under no circumstances should this device be
seen as a toy.
It should therefore, quite clearly, not be left in
the hands of a child.
Connection precautions.
To prevent any risk of electric shock or
irreversible damage to the equipment, you
should comply strictly with the following
recommendations.
4The installation to which this device is
connected must comply with the applicable
regulations.
4This device is designed to be connected to
220-240V 50Hz or 100-120V 60Hz single phase
circuits. 115V / 230V selection is automatic.
220-240V only for 24V100A version.
4The mains power line must feature a cut-off
device with differential protection, to protect
individuals against electric shocks. Refer to the
device's electricity consumption characteristics
to select the size and type of circuit breaker.
UK