Belkin PureAV PF31 Manuel D'utilisation page 9

Hookup and Installation
Step 3
Connect Audio Components to the Audio Filter
The Belkin PureAV Power Console PF31 contains an isolated Audio Filter
that is optimized to clean and condition the power to all of your audio
components. The Audio Filter also isolates your audio components from
connected video and high-current audio components.
A. Attach Belkin PureAV power cord labels to each component's power
cord before you plug the cord into the corresponding outlet on the
Power Console.
B. CD – Connect your CD player power cord to the outlet labeled "CD".
C. Tape – Connect your tape player power cord to the outlet labeled
"Tape".
D. Auxiliary – This outlet can be used to connect any other audio
equipment you may have.
E. Receiver (Preamp) – Connect your receiver or preamp power cord to
the outlet labeled "Receiver".
Note: You can connect any type of audio component into the Audio
Filter outlets. You are not limited to the components listed above.
8