Playing Dvd - Saba CB22CH17 Manuel D'utilisation

Playing DVD

Basic Operation
Before you insert the disc into DVD, please turn TV into DVD mode first.
Press SOURCE button on the remote, then highlight DVD on the input source and
press ENTER button.
Once "DVD" logo comes up on the screen that means DVD mode is activated.
The film may start automatically or you may be presented with a menu screen, this is
dependent on the way the DVD disc has been created by the movie company.
Press the ENTER button to begin playback or use the
the menu.
1.PUT THE D ISC
Put the disc in the intake bin,the disc will be automatically absorbed.
After the disc is read,the information about the disc such as disc type will be
displayed on the screen and the disc will be automatically played.
Note:
Please do not touch the information transcription side of the disc.
Do not move this machine in playing, otherwise, it will damage the disc.
The DVD only support 12cm disc.
2. OPEN/CLOSE
Press button to open the disc tray and load a disc in it.
Press button again to close the disc tray.
3. FAST REVERSE/FAST FORWARD
In playing, press
fast reverse. As to DVD,the play speed changes as follows:
To recover the normal play, press
button ,you can play the disc in form of fast forward or
/
2X
4X
8X
16X
32X
►
▲/▼/◄/►
/
2X
/
4X
/
8X
/
16X
/
32X
button.
26
buttons to navigate