Cleaning And Storage; Technical Data - DS Produkte MT20188 Mode D'emploi

EN
Using several cars
In order for several cars to be used at the same time, each car is assigned either channel
A or channel B via which it can be controlled with the remote control. Each car must be
paired with its remote control as follows:

Cleaning and Storage

PLEASE NOTE
■ Do not use any corrosive or abrasive cleaning agents or scouring sponges to clean
the article. The surfaces could be damaged.
• Wipe down the article with a damp cloth if soiled and then dry it with a soft cloth.
• Store cool and dry, preferably in the original packaging.
• Keep out of the reach of animals and children under the age of 3.

Technical Data

Article number:
Model number:
Car power supply:
Remote control power supply:
Protection class:
Manual ID:
20
1. First switch on a car and the corresponding remote control
with the ON / OFF switch (ON position).
2. Then push the A / B switch on the remote control to posi-
tion A.
3. Press the toggle switch briefl y so that the car starts
to move.
4. Pair the second car with its remote control in the same
way, but push the A / B switch on the remote control to
position B.
01155
MT20188
3.7 V DC (Li ion battery)
3 V DC (2x 1.5 V batteries, AA type)
III
Z 01155 M DS V1.1 0818