Tips And Recommendations For Installation - SOMFY Home Motion Sonesse 50 RA Notice D'installation Et D'utilisation

EN
Setting the lower end limit
V
1) Press the button on the control point to lower the
motorised product to the lower end limit.
2) Press the Stop button on the control point when the
motorised product reaches the desired lower end limit.
Looking from the point of view of the motor head:
If the motorised product lowers on the left-hand
side of the motor head, press the white button to
unlock it: the lower end limit is set.
If the motorised product lowers on the right-hand
side of the motor head, press the yellow button to
unlock it: the lower end limit is set.
The end limits are set.

2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION

2.4.1. Questions about the Sonesse 50?
Observations
The wiring is incorrect.
The motorised product
The drive is in thermal protection.
does not operate.
The control point is not compatible.
The motorised product
The drive wheel and the crown are not
is noisy:
suitable for the tube.
The motorised product is compressed
between the brackets
The tube contains swarf and screws.
12
Images not contractually binding
Possible causes
Check the wiring and modify it if necessary.
Wait until the motor cools down.
Check for compatibility and replace the control
point if necessary.
Replace the drive wheel and the crown
Increase the play between the brackets
Clean the roller tube.
Copyright © 2014 Somfy SAS. All rights reserved.
1)
2)
Solutions