Denon Professional DN-200BR Guide D'utilisation page 6

Setup
Items not listed under
1. Use either XLR cables or 1/4" (6.35mm) cables to connect the DN-
200BR's outputs (balanced or unbalanced) to your loudspeakers,
mixer, amplifier, or other device that accepts line-level inputs (this
device must be powered off).
Important: For stereo operation, make sure all left (L) and right (R)
outputs are connected to left and right inputs, respectively.
2. Use the included power adapter to connect DN-200BR's power
input to your power source.
Important: Do not use DN-200BR near a microwave oven, which can
interfere with the reception.
3. If you are using a mixer, make sure all of its connections are secure,
and power it on.
4. Power on your loudspeakers last.
6
Introduction > Box Contents are sold separately.