VESTEL VHD60BS Mode D'emploi page 63

iii. Attach the plate II to the wall with two 4mm x 30mm screws.
iv. Put the expansion pipe on the one-way valve. Attach the expansion
• If you have an outlet to the outside, your cooker hood can be connected
by means of an extraction duct (enamel, aluminium, flexible pipe or non-
flammable material with an inner diameter of 150-120mm).
i. Attach plate II to the wall with two 4mm x 40mm screws.
ii. Put the expansion pipe on the one-way valve. Attach the expansion
63 | VESTEL VHD60BS- VHD60BW- VHD90BS- VHD90BW
VHD60ASX- VHD60AWX- VHD90ASX- VHD90AWX
pipe with the cable tie. Attach the other side of the expansion pipe to
the diverter.
pipe with the cable tie. The cooker hood can be connected by
means of an extraction duct (enamel, aluminium, flexible pipe or non-
flammable material with an inner diameter of 150-120mm).