Names And Functions Of Parts - Teac UD-501 Mode D'emploi

Names and functions of parts

A B
A POWER switch
Use to turn the power ON and OFF.
B PHONES jack
Connect headphones with a standard 6.3 mm (1/4")
stereo plug here.
C INPUT SELECTOR knob
Use to select the input source. The indicator lights
next to the selected input source.
Use to change setting values when a menu item is
shown.
o If you turn this knob when the unit has entered
standby because of the automatic power saving
function, the unit's power will turn ON again.
D MENU button
Press to enter setting mode (page 15).
o If you press this button when the unit has entered
standby because of the automatic power saving
function, the unit's power will turn ON again.
C D
E Display
This display shows information about the audio play-
ing back and menu screens.
F PHONES LEVEL knob
Use to adjust the headphones output volume. Turn
right to increase and left to decrease the volume.
o This knob does not adjust the output level from the
The maximum volume level is 0 and the minimum
level is −∞ (negative infinity). When using head-
phones, before turning the power on, use the
PHONES LEVEL knob to set the headphones volume
level to its minimum (−∞). Failure to do so might
cause sudden loud noises, which could harm your
hearing or result in other trouble.
E
analog LINE OUT connectors.
F
7
EN