Display Brightness - Teac UD-501 Mode D'emploi

Simultaneous headphones and line
output
OFF
Simultaneous output is not possible.
When you connect headphones, the analog audio out-
puts will be disabled.
ON
Simultaneous output is possible.
Even when you connect headphones, the analog audio
outputs stay enabled.
USB input circuit power
AUTO
The USB port is powered only when the input is USB.
When any other input is active, the USB port is not
powered.
ON
The USB port is always powered.
Setting mode (UPCONV, DF, AF) display
Use to set whether or not the setting mode (upconverter,
filter, DSD reception method, etc.) is also shown when the
input source is shown on the display.
OFF
Setting mode not shown.
ON
Setting mode shown.

Display brightness

DIM3
Ordinary brightness
DIM2
Slightly dim
DIM1
Even dimmer
DISP OFF
Display off
EN
17