Using The Accessories; After Use; Technical Specifications - Velleman CAMCOLI8 Mode D'emploi

6.4 Using the Accessories

To attach an accessory, slightly open the clip on the base, place
the ring over the camera head and release. Make sure the
accessory is firmly attached.
Use an accessory with extreme care and withdraw slowly from
the camera head.

6.5 After Use

After use, close the software, disconnect the camera from the
computer and clean carefully before storing it in a dry and clean
place.

7. Technical Specifications

pick-up element .................................................... 1/6" CMOS
number of pixels ........................................... 640 (H) x 480 (V)
viewing angle ................................................................... 54°
focus ............................................................................. 3 cm
input interface ............................................................USB 2.0
white balance .................................................................. auto
picture format ........................................................ JPEG, BMP
system requirements
IP rating ..................................... IP67 (camera + flexible tube)
power supply...................................5 VDC, 20 mA via USB port
V. 01 – 10/10/2018
CAMCOLI8
.................. Windows XP/Vista/Windows 7/Windows 8 (8.1)/
................................................... Windows 10 32 & 64-bit
............................................................ free USB 2.0 port
8 ©Velleman nv