Front Panel Operation - Alesis Roadfire 15 Guide D'installation Rapide

1. Input – Plug your guitar into this 1/4" unbalanced input using a TS cable.
2. Program Up/Down Buttons – Change the program number with these
buttons. When pressed together, they put the unit into both Bypass and Mute
modes and access the tuner.
3. Display – indicates bank and program, shows parameter values, and displays the
pitch in tuner mode.
4. EFFECT Knob – puts the Roadfire in PLAY mode or EDIT mode. You are in
EDIT mode when this knob is set to anything other than PLAY.
5. VALUE Knob – adjusts parameter values and program numbers; stores changes.
6. MASTER VOLUME Knob – controls the volume of the signal sent to the
speaker, headphones, STEREO LINK OUTPUT and SPEAKER OUTPUT.
7. HEADPHONES Jack – Plug in your headphones using a 1/4" stereo plug.
2

Front panel operation