Alesis Roadfire 15 Guide D'installation Rapide page 12

FX2 (Multi-Effect Module 2, Stereo Effects)
This module gives you a choice of stereo effects. These effects include all those found in FX1 except
for Flanger, Rotary Speaker, Chorus and Pitch Transpose. FX2 also gives you the following additional
effect.
PARAM (Direct-Control Parameter for FX2)
These parameters work exactly the same way as the direct-control parameter for FX1, with the
following addition.
FX3 (Multi-Effect Module 3, Delay-Based Effects)
This module gives you a choice of delay-based effects. A delay is an echo of the original signal that can
occur at varying frequency and time.
10
Auto Phaser
A phaser for which the delay is controlled by playing intensity.
For Auto Phaser, indicates the rate of the effect.
Doubling
Doubles the signal with a slight delay, creating the effect of two instruments playing at
once. Higher values indicate higher intensity.
Pedal Doubling
Doubling effect with its intensity controlled by the expression pedal.
Ping Pong Delay
Creates a delay that bounces back and forth between the right and left sides of the
stereo spectrum. Higher values indicate more feedback.
Pedal Ping Pong
Ping Pong Delay effect with its amount of feedback controlled by the expression
pedal.
Tape Delay
Emulates the retro tape-delay effect that was created by recording a signal to tape and
playing it back as a delay. Higher values indicate more feedback.
Pedal Tape Delay
A Tape Delay effect with its feedback controlled by the expression pedal; great for
singling out notes or sections to echo.
Stereo Delay
A standard delay that occurs in stereo. Higher values indicate more feedback,
producing a longer-repeating echo.
Pedal Stereo Delay
A Stereo Delay effect for which the feedback level is controlled by the expression
pedal.
Echo
An echo for which higher values indicate a wetter signal and lower values indicate a
drier signal.
Pedal Echo
An echo for which the wet/dry mix is controlled by the expression pedal.