Conrad Electronic FS8 Notice D'emploi page 29

• Adjust the volume of the subwoofer to the volume of the other loudspeakers using the LEVEL control (2).
The subwoofer should not blast or be audible separately. It should merely support the other loudspeakers in the
low-bass range.
The volume ratio between the subwoofer and the other loudspeakers can also be controlled later using the
volume control on the volume remote control from the driver's seat.
• For the best sound results, you can modify the crossover frequency using the FREQ control (5). Make sure that
the bass is played cleanly and smoothly fits in with the sound of the other loudspeakers.
• Try different settings of the PHASE control (4). In many cases, modifying the phasing can improve the sound of
the bass (depending on the place of installation of the subwoofer).
• If the low bass is too weak, you can activate the infinitely variable low-bass amplifier using the BASS EQ control
(3). The further the control is turned clockwise, the louder the low bass frequencies.
• After completing all the adjustments, you can control the volume of the subwoofer from the driver's seat using
the control on the volume remote control.
29