Disc Operation; Disc Initialize; Disc Operation In Dvd±Rw Disc - Tech Line DVRC 700 Mode D'emploi

DF-T3712S-SA-W(GB) 2006.9.13 10:0 AM

Disc Operation

Disc Operation

Disc Initialize

• If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording).
• Do not start recording until disc initialization is complete.
• If you load a DVD±RW that has already been used you can record a program immediately.
Disc Operation in DVD±RW disc
For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
The DVD±RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with
most other DVD players.
At first, go to Disc Operation mode.
1
Press [SETUP]. The Setup menu appears.
2
While 'Disc Oper' is selected, press [ENTER] to go to the Disc
Operation page.
Erase the disc (DVD±RW)
3
Use [.../†] to select the 'Erase' menu.
4
If you want to erase the whole disc, press [ENTER].
5
To confirm, select 'OK'. To cancel, select 'Cancel'.
If you select 'OK' and press [ENTER], all the contents of the disc will
be lost.
Protect Disc (DVD±R, DVD±RW)
If you want to protect a disc from accidental recording, editing, or
erasing, you can lock the disc. Later, if you change your mind, you can
unprotect the disc.
3
Use [.../†] to select 'Protect' menu.
4
If you want to protect the whole disc, press [ENTER].
5
To confirm, select 'OK'. To cancel, select 'Cancel'.
If you select 'OK' and press [ENTER], all the contents of the disc will be protected.
˘ ` 45 mac001 1200DPI 90LPI
DVD Recorder
Init Setup
Disc Operation
œ √
Select
Init Setup Disc Oper Disc Edit Timer REC
Erase
Finalize
Protect
Disc Operation
Make Comp
...† Select
Adapt
ENTER
OK
Disc Info
DISC
Exit
_
Exit
Erase
Erase this disc?
OK Cancel
Erase
Finalize
Protect
Disc Operation
Make Comp
Select
...†
Adapt
ENTER OK
Disc Info
DISC Exit
_
Exit
Protect
Protect this disc?
OK Cancel
45