Displaying Tv Information - Tech Line DVRC 700 Mode D'emploi

DF-T3712S-SA-W(GB) 2006.9.13 10:0 AM

Displaying TV Information

While watching TV, press [DISPLAY] to display/remove the on-screen display.
You would see a screen like the following:
Changing the TV Audio Channel
You can change the TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO Audio Signal :
• MONO Audio Signal :
• BIL Audio Signal :
BIL1
The current audio channel is displayed on-screen.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [PR+/-] buttons on the remote control or
[PR+/–] buttons on the front panel.
˘ ` 29 mac001
Stereo Mono Stereo
Mono
BIL2 BIL1
1200DPI 90LPI
On-Screen Display Overview
PR 1 : - - - -
STEREO
PDC
12:30
SP
29