First Time Installation - Xoro HTC 1526D Mode D'emploi

When you start the HTC TV set the first time and choose TV or DTV, than appears the in-
stallation guide on the screen. With this guide you can search analogue and digital TV chan-
nels. The search routine includes the frequencies of the analogue and digital broadcaster.
1. Please select the OSD language.
You can choose the pre-installed
languages by pressing the ◄ or ►
buttons. If you find your languages,
please confirm the language by
pressing the OK button.
2. Press the ▼ button and navigate to
the option „Auto Tuning". The search
starts when you press the ► button.
3. A new popup window appears on the
screen. There you can see the op-
tion country
choose the suitable country by
pressing the ◄ or ► buttons.
4. If you had chosen the country,
please press the ▼ button, so that
the „Start" field will be marked with
blue and is active. Press the OK
button and the search starts immedi-
ately.
5. A new window opens on the screen,
where the status of the searching is
documented. The values of the
found TV broadcast stations of analogue, digital and Radio are listed.
6. After finishing of the searching, all found TV broadcast station will be saved into the
channel list. You can look at the TV channel list by pressing the LIST button.
Note:
The complete searching needs a couple of minutes.
22

First Time Installation

selection. Please