Mounting The Stand - Xoro HTC 1526D Mode D'emploi

The TV set will be delivered without mounted stand. The stand can be mounted easily in
four steps
1. Please unpack the TV set carefully out off the box.
The stand bracket is pre-assembled. On the bottom
side of the bracket you can find two plug-and-socket
connectors. This connectors must not damaged.
2. Place the stand on a stable ground and arrange the
stand in order to the picture.
3. Arrange the TV set above the stand and connect the
stand bracket carefully with the stand. Please refer the
picture.
4. Press carefully the TV set down until the plug-and-socket
connectors locked into the stand. Control the mounting and
fitting of the stand and lift the stand carefully. The stand
does not drop off from the TV set.
12

Mounting the Stand