Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PARTS
1.
Handle
2.
Lock clip
3.
Power indicator
4.
Temperature indicator
5.
Baking plates
6.
Baking surface
7.
Baking plate clip-locks
8.
Cord storage
REMOVAL AND PLACEMENT OF PLATES
REMOVAL
1.
Unplug and let the appliance cool off completely before
removing plates.
2.
Open the Sandwich maker using the handle.
3.
Push the two baking plate clip-locks (7) of the lower plate
towards you, one after the other, to remove the plate. As soon as
you disconnect the second lock, the plate will pop up.
4.
Push the lock of the upper plate away from you to release it.
Then remove the plates from the appliance.
PLACEMENT
1.
Open the appliance.
2.
At the bottom and top of both baking plates there are two ridges
that fit into the slots of the appliance. Fit the ridges of the baking
plate into the 2 slots closest to the hinge of the appliance.
3.
Push the first baking plate into place with your two thumbs so that it clicks into place.
The lock will keep the baking plate in place when it is installed correctly.
4.
Do the same for the second baking plate and make sure both plates are properly installed
by carefully closing the appliance.
24
DO9166C
4
3
1
2
6
5
7
8
Publicité
Table des Matières
