Sony Alpha ILCE-7RM4 Mode D'emploi page 56

Note
• Do not turn on/off or restart the computer, or wake the computer from sleep
mode when a USB connection has been established between the computer
and the camera. Doing so may cause a malfunction. Before turning on/
off or restarting the computer, or waking the computer from sleep mode,
disconnect the camera from the computer.
Disconnecting the camera from the computer
Perform steps 1 and 2 below before performing the following operations:
• Disconnecting the USB cable.
• Removing a memory card.
• Turning off the product.
1
Click (Safely Remove Hardware and Eject Media) in the
taskbar.
2
Click the displayed message.
Note
• On Mac computers, drag and drop the memory card icon or the drive icon into
the "Trash" icon. The camera will be disconnected from the computer.
• Depending on the computer you are using, the disconnection icon may not
appear. In that case, you can skip the steps above.
• Do not remove the USB cable from the camera while the access lamp is lit. The
data may be damaged.
GB
56