Continuous Shooting - Sony Alpha ILCE-7RM4 Mode D'emploi

Masquer les pouces Voir aussi pour Alpha ILCE-7RM4:
Table des Matières

Publicité

Continuous shooting

Shoots images continuously while you press and hold down the shutter
button.
1
(Drive Mode) on the control wheel 
Select
/
[Cont. Shooting].
• You can also set the drive mode by selecting MENU 
 (Camera Settings 1)  [Drive Mode].
2
Select the desired mode using the right/left side of the control
wheel.
Continuous Shooting: Hi+: Images are shot continuously at the
maximum speed while you press and hold down the shutter button.
Continuous Shooting: Hi /
Continuous Shooting: Lo: Subjects are easier to track because
the subject is displayed in real-time on the monitor or viewfinder
during shooting.
Hint
• To continuously adjust the focus and exposure during continuous shooting,
set as follows:
– [Focus Mode]: [Continuous AF]
– [
 AEL w/ shutter]: [Off] or [Auto]
Note
• The shooting speed during continuous shooting becomes slower when
[
 RAW File Type] is set to [Uncompressed].
• The shooting speed during continuous shooting becomes slower when
[e-Front Curtain Shutter] is set to [Off] in [Continuous Shooting: Hi],
[Continuous Shooting: Mid] or [Continuous Shooting: Lo] mode.
• When the F-value is greater than F11 in [Continuous Shooting: Hi+],
[Continuous Shooting: Hi] or [Continuous Shooting: Mid] mode, the focus is
locked to the setting in the first shot.
• The subject is not displayed in real-time on the monitor or viewfinder when
shooting in [Continuous Shooting: Hi+] mode.
• The speed of continuous shooting decreases when you shoot with a flash.
Continuous Shooting: Mid /
GB
GB
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A7 r iii

Table des Matières