Bosch eShift RIDE+ Notice Originale page 5

eShift with Shimano Di2 automatic hub gears
You can operate the automatic Shimano Di2 hub gears in
manual or automatic mode.
Use the Shimano gearstick to shift gears in manual mode. In
automatic mode, the gear shifting system shifts gear auto-
matically as a function of the speed, the force you exert on the
pedals, and the cadence.
The change from automatic mode to manual mode (depend-
ing on the gearstick you use) is described in the operating
instructions for your gearing.
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display when-
ever the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to a
set "Start gear". The "Start gear" can be set in the basic set-
tings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
– ...
– "– Start gear +": The starting gear can be set here. In the
"––" position, the automatic function for shifting down a
gear is switched off. This menu item is displayed only when
the on-board computer is in the holder.
– "Gear adjustment": This menu item can be used to per-
form precision adjustment on the Shimano Di2. The pre-
defined adjustment range can be found in the operating
instructions provided by the transmission manufacturer.
Perform precision adjustment as soon as you hear the
gearing make unusual noises. This menu item is displayed
only when the on-board computer is in the holder.
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is dis-
played briefly during a gear shift only when the eShift field is
not visible (e.g. in settings). An "A" appears next to the gear
display in automatic mode.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
0 275 007 XES | (22.6.17)
If you use the gearstick in automatic mode, the gear shifting
system shifts to the next gear but remains in automatic mode.
Manual gear shifting operations in automatic mode have a
long-term impact on the gear shifting behaviour of your gear
shifting system and adapt the gear-shifting operations to your
cycling behaviour (adaptive system).
When the system is switched on for the first time with a new
wheel which has not been used before, the gears are firstly
calibrated. For this purpose, the automatic system shifts to
the highest/lowest gear during the first trip and then shifts
through all gears once.
– ...
– "Gear vx.x.x.x": This is the software version of the
variable speed transmission. This menu item is displayed
only when the on-board computer is in the holder. This
menu item is only displayed in conjunction with an elec-
tronic variable speed transmission.
– ...
Intuvia eShift function displays
You can choose from the following additional functions in the
function display (combination of text display and value
display):
– ...
– "Auto: on/off": This menu item indicates whether auto-
matic mode is switched on or off.
– ...
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to a
set "Start gear". The "Start gear" can be set under
"My eBike" > "eShift".
You can precisely adjust the Shimano Di2 under "Gear ad-
justment". The pre-defined adjustment range can be found in
the operating instructions provided by the transmission
manufacturer. Perform precision adjustment as soon as you
hear the gearing make unusual noises.
English–2
Bosch eBike Systems