Table Des Matières - Mantis 8520-00-38 Traduction Du Mode D'emploi D'origine

CONTENT
1. Introduction to the Operating Instructions
2. Illustration and explanation of pictograms
3. Technical Data
4. General safety instructions
5. General safety information for power tools
1) Safety at the workplace
2) Electrical safety
3) Personal safety
4) Use and handling of the power tool
5) Service
6) Emissions
7) Safety instructions for chain saws:
8) Causes of kickbacks and how to avoid them:
9) Important instructions for your personal safety
a) General safety instructions
b) Instructions on using the chain saw safely
c) Warning to the danger of recoil ("kickback")
d) Instructions on safe working techniques
6. Starting up
1) Filling the oil tank
2) Assembling the blade and chain
3) Connecting the chainsaw
4) Switching on
7. Safety devices on your chain brake
1. Chain brake
2. Rundown brake
3. Safety starting lock
4. Chain catch bolt
8. Instructions on working properly with the chain saw
a) Felling a Tree
b) Notching Undercut
c) Felling Back Cut
d) Limbing a Tree
e) Bucking a Log
9. Maintenance and Servicing
Transport
10. In the case of technical problems
11. Repair Service
12. Waste disposal and environmental protection
13. EC Declaration of Conformity
MANTIS LIMITED WARRANTY
GB | Operating Instruction
GB-1
Page
GB-2
GB-2
GB-2
GB-3
GB-3
GB-6
GB-7
GB-7
GB-8
GB-8
GB-9
GB-9
GB-9
GB-10
Translation of the original Operating Instructions