Options - Icom IC-SAT100 Notice De Base

D BATTERY PACK
• BP-300 BATTERY PACK
Voltage:
Capacity:
Approximate battery life*: 14.5 hours
* Operating periods are calculated under the following conditions.
TX : RX : standby = 5 : 5 : 90
D CHARGERS
• BC-241 DESKTOP CHARGER + BC-242 AC ADAPTER
To rapidly charge a single battery pack.
• BC-214N MULTI CHARGER + AD-140 CHARGER ADAPTER +
BC-157S AC ADAPTER
To rapidly charge up to 6 battery packs.
• BC-247 DOCKING STATION + BC-242 AC ADAPTER
The wall-mountable charger.
D OTHERS
• OPC-656 DC POWER CABLE
Use with a 13.8 V power source instead of the power adapter. (Use with the BC-214N)
• FA-S102U ANTENNA
• AH-40 ANTENNA
The antenna with a magnet base and cable (Approximately 1.5 m, 4.9 feet).
• OPC-2422 COAXIAL CABLE
An extension cable for use with the AH-40 (Approximately 5 m, 16 feet).
• MBB-5 BELT CLIP
• HM-222 SPEAKER MICROPHONE
With an Emergency key.
The HM-222 meets IP68 requirements for waterproof protection.
• VS-3 Bluetooth
HEADSET
®
The Bluetooth headset with a [PTT] switch.
®
About the third party Bluetooth
Icom has checked the PTT operation with some 3M Peltor headsets such as the WS
Headset XP, WS ProTac XP and WS Alert XP. (Compatibility not guaranteed.)
• VS-5MC PTT SWITCH CABLE + HS-94*
VS-5MC: Used to connect a headset to a transceiver.
*
Ear-hook type * Neck-arm type
1 2
• HM-163MC TIEPIN TYPE MICROPHONE
+ EH-15B EARPHONE, SP-28 EAR HOOK TYPE EARPHONE,
SP-26 TUBE EARPHONE
• SP-32 TUBE TYPE EARPHONE ADAPTER
For use with EH-15B.
• SP-27 TUBE EARPHONE, SP-29 EAR HOOK TYPE EARPHONE,
SP-40 EARPHONE + AD-135 EARPHONE ADAPTER
AD-135: Used to connect an earphone to the transceiver's multi-connector.
• AD-118 ACC ADAPTER
Used to connect a headset with Hirose-6-pin connector to the transceiver's multi-
connector.
Some options may not be available in some countries. Ask your dealer for details.
7.2 V
2200 mAh (minimum), 2350 mAh (typical)
headsets:
®
, HS-95*
1
* HS-97: Throat microphone
3

OPTIONS

, HS-97* HEADSET
2 3
5
1 1
2 2
3 3
12