8.2.3 – CLEANING THE EXTERIOR OF THE APPLIANCE
Carry out this operation whenever necessary.
APPLIANCE STATUS:
-
ON/OFF button on OFF (
-
power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
METHOD
Clean the external surfaces of the appliance (door, side strips and steel panels), using a sponge soaked with neutral
detergent, neither of which must be abrasive. Rinse thoroughly using a clean sponge soaked with water and then wipe
dry using a clean cloth.
Only use water and non-abrasive neutral detergent to clean the appliance. The use of other products
could damage the appliance surfaces and affect overall quality and hygiene.
Do not use abrasive sponges.
When cleaning do not use cloths that leave lint.
WL5/1-2 Rev.00 05-2013
on the display);
pag. 57