Noise/Vibration Information; Description Of The Symbols - Jumbo ayce NC200ES Manuel D'utilisation

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 62841-1.
WEAR HEARING PROTECTION!
Vibration total values (triax vector sum) determined according to EN 62841-1: The
vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 62841-1 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
180814_ayce_NC200ES_IM

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
This symbol, marking a point of safety, indicates a
!
caution, warning or danger. Ignoring this warning can
result in an accident to yourself or others. To limit the
WARNING
risks of injury, fire or electrocution, always follow the
recommendations indicated.
Before any use, refer to the corresponding section in
this user manual.
These symbols indicates the requirement of wearing
ear protection, eye protection, respirator and gloves
when using the product.
Conform to applicable safety standards.
Recycle unwanted materials instead of disposing of
them. All appliances and packaging should be sorted
and tendered at a regional recycling centre into to be
processed in an ecological manner.
Proven safety of the federal inspectorate for heavy
current installations ESTI.
78 79 |
GB
180814_ayce_NC200ES_IM