Bellcome VK2.P1F.T3X.BLW Manuel De L'utilisateur page 32

S5. Restore to default


Select
setup
Select the Information... item, this item will show information about
the product: Hardware and software version, voltage information,
manufacturing code.
To set all the parameters of the terminal to initial values, select
Restore to default item, then touch the MENU key
Restore to default operation will not change the time and date
settings.)
Select Exit and touch
S6. Unlock parameter settings
After the installation of a electromagnetic lock or of an auxiliary
automation the Unlock parameter has to be set from the terminal.


Select
setup
Select the Information... item and touch the MENU key
Restore to default without touching again the key
If the keys
key and then touch the Access key
Use the keys to select an item. Use the
increase the value of the item. Settings will be performed
immediately. Select the Exit item and touch
Note:
1. If one electromagnetic lock is installed the Unlock Menu must be
set to 1.
2. If there is one electromagnetic lock and one auxiliary automation
connected to the system, the Unlock Menu must be set to 0. In this
mode, touch the Access key
the keys to select the item you want, and touch the Access
or MENU key to release the corresponding lock.
3. The Restore to default operation will not change the Unlock Menu
setting.
4. Unlock mode is not functional.
5. Select Unlock Time to set the time interval for the unblocking of the
lock: 1..9 s.
S7. Screen and volume adjustments
During monitoring and talking, touch the
ADJUSTMENTS MENU will be displayed. Use the keys
the adjustment item; use the keys
1. The first item is Scene mode selection. A total of 4 screen modes can
be selected in sequence: NORMAL, USER, SOFT, BRIGHT. Whenever
you modify Brightness or Color , the Scene item will be set to USER
mode automatically.
2. The Brightness and Color items adjust the quality of the image. Adjust
the values to get a good quality of the image on the monitor.
3. The Ring Volume and Talk Volume items adjust the ring tone and
talking volume.
4. Note that all the modifications will be done immediately after the
operation. Touch the MENU key
MENU.
Advanced set...
to return to the MAIN MENU page.
Advanced set...
are disabled (unlit), touch first the ON/OFF
and hold for 2s.
, two lock icons will be showed. Use
to decrease/ increase the value.
again to exit the ADJUSTMENTS
. ( Note that the
. Select
.
keys to decrease/
to exit.
MENU key. The
to select
Slave Addr Set -- 0
Guard Unit Set -- 0
Date/Time Set...
Other Settings...
Information...
Exit
Hardware ver 0302
Software ver 0168
Voltage 22.4V
Manufacture 00.0T
Restore to default
Exit
Unlock Time 3
Unlock Mode 0
Unlock Menu 1
Exit
1
2
user
Scene
Slave Addr Set -- 0
５
Guard Unit Set -- 0
４
Date/Time Set...
２
Other Settings...
Information...
６
Exit
14/16