Publicité
Les langues disponibles
Les langues disponibles
How do I start the clock?
Automatic Set-Up
•
Insert a battery (LR6, 1.5 V, Type AA) correctly into the battery compartment.
•
The second hand will move to the 12 o'clock position, followed by the minute and hour
hand.
•
After receiving and processing the radio signal (3 to 12 minutes), the clock will
automatically set itself to the correct time.
•
Please do not move the clock during this process.
•
If the clock has not set itself after 12 minutes, your reception may be faulty or the signal
cannot be received at the chosen location.
•
Repeat the set-up by choosing a different location and press the RESET button.
Manual Set-Up
•
Press and hold the M.SET button for 3 seconds to enter manual setting mode.
•
Press the M.SET button for 1 second to advance 1 minute.
•
Press the M.SET button for more than 1 second to automatically advance the minute hand.
•
If the M.SET button is not pressed for 8 seconds the clock is set to the displayed time.
Reset the Clock
•
Press the RESET button to reset the clock.
•
The second hand will move to the 12 o'clock position, followed by the minute and
hour hand.
•
The clock will now start to receive the radio signal.
2
ENGLISH
Publicité
