Cooling Mode; Heating Mode; Dry Mode - Vesta VAC-09CH Manuel D'installation Et D'utilisation

COOLING MODE

The cooling function allows the air conditioner to cool the room and
at the same time reduces Air humidity.
To activate the cooling function [COOL], press the [MODE] button
until the symbol COOL appears on the display.
The cooling function is activated by setting the button
at a temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust the tempe-
rature (1), the speed (2) and the direction of the air flow (3) by
pressing the button indicated.

HEATING MODE

The heating function allows the air conditioner to heat the room.
To activate the heating function [HEAT], press the [MODE] button
until the symbol HEAT appears on the display.
With the button or
of the room.
To optimize the function of the Air conditioner adjust the tempe-
rature (1), the speed (2) and the direction of the air flow (3) by
pressing the button indicated.
CAUTION
● In HEATING operation, the appliance can automatically activate a defrost cycle, which is essenti-
al to clean the frost on the condenser so as to recover its heat exchange function. This procedure
usually lasts for 2-10 minutes during defrosting, indoor unit fan stop operation.
● After defrosting, it resumes to HEATING mode automatically..
DRY

DRY MODE

This function reduces the humidity of the air to make the room
more comfortable.
To set the [DRY] mode, Press [MODE] until DRY appears in the
display. An automatic function of alternating cooling cycles and
air fan is activated.
COOL
HEAT
set a temperature higher than that
EN
or
3
3
12
KEN002VAC
v1• 11.11.2020
OPTION
1
TURBO
ECO
2
MODE FAN
OPTION
1
ECO TURBO
2
MODE FAN
OPTION
ECO TURBO
MODE FAN